Hiring an HVAC Winnipeg professional to either replace old heating and cooling equipment or install a brand new unit is something with which not every homeowner is entirely comfortable. The best way to confront this type of challenge is to gain some great tips and tricks. The article below should serve that purpose quite nicely.
Do not be surprised if the HVAC contractor you choose does an evaluation on your home. Any good contractor will spend time looking at the system you currently have and what the needs are for your home. They will also take a look at your duct system and look for air leaks.
Some fan condensers may contain oil parts, and if yours does, ensure it is lubricated at least once per year. These ports are typically covered with caps made of metal or rubber. Use SAE 20 oil that is lightweight and detergent free, and put ten drops or fewer into each one. Make sure not to overfill them.
When you are no longer using your outdoor air conditioning unit, be sure to protect it with a tight cover. This will keep it free of debris, frost and snow so that you’ll have a working unit when the spring comes and you are ready to uncover it and use it again.
Be sure to check your evaporator coil drains frequently when your air conditioner is running. If this tube backs up, you can find water damage to your walls, ceilings and floors. If you end up with mold just use a solution of bleach and water to clean out the tube.
If you currently have a manual thermostat, consider installing a programmable one. You can set your system for different temperatures depending on time of day and if anyone is home. Also, you can set upper and lower temperature settings to allow for a comfortable range of temperatures so that heating and cooling don’t kick in when not needed.
If you are a home owner, replace whatever single pane windows you have with more efficient double-paned versions. Having double pane windows allows your air conditioning unit to be run much less during the summer, because the cool air is kept inside the home. It also facilitates heat retention in winter.
When you buy a new air conditioning unit, don’t let the salesperson talk you into too large of a unit. This will be a waste of money and won’t efficiently cool your home. The longer a system runs, the more efficient it will be when it’s running, so look for one which runs 15 to 30 minutes.
Use an online sizing calculator to help you calculate the proper size of the air conditioning unit you should purchase. While you might think that a larger HVAC system is always better, in fact, larger systems sometimes are not the best choice for a particular space. Check your manual to figure out what the rating is from the manufacturer to be sure you’re getting the right information.
Use plants to increase your air conditioner’s effectiveness. An AC unit fully shaded by trees and shrubbery can operate up to 10 percent more efficiently. However, do keep spacing in mind. Air flow must not be constricted, and technicians need room to work when they come out to service your unit.
The energy efficiency of a unit should be taken into consideration when purchasing a new heating and cooling system. Although you should be concerned about the price of a unit, the efficiency of the unit will save you thousands over the lifetime of the heating and cooling system and should weigh heavily on your buying decision.
Change your filter on a regular basis. This is one of the easiest HVAC tips that you can do yourself. It is also one of the least expensive things that you can do to ensure that your system is running efficiently. Clogged and dirty filters can make your unit work 5-10% harder.
When dealing with HVAC contractors, make sure that you get everything in writing. While verbal contracts are legal in many places, it is usually very difficult to prove them. Having everything on paper is a great way to make sure that no ons is confused about any aspect of the process.
Determining the direction in which your house faces can help make the HVAC system efficient. Trees placed in the right places can keep the sun from heating your home too much. The cooler your home already is, the less work your AC will have to do.
When water condenses on your air conditioner, it drips into a pan and drains out. This drain should be inspected on a regular basis. If algae forms in the drain line or if the drain line freezes, you could be in for some expensive repairs. The drip pan could overflow causing extensive damage to your ceilings.
Make sure to be specific about everything that is written in your contracts. It should detail the work that is being done, the materials being used and the amount of time it will take to complete the job. Leaving anything out can give the contractor an exit if something goes wrong.
If you hear clicking noises from your condenser fan, make sure that it is not striking something inside the unit. If it is not hitting something, it may be bent. Do not try to straighten the blades. This could cause it to become unbalanced. Simply replace the blade to ensure proper rotation.
Do not let the heat build up inside your home. Lighting, electronic devices and appliances are all common sources of heat inside the home. To prevent this excessive heat, do not put televisions or lamps close to your a/c’s thermostat. These appliances make the a/c think that the house is hotter than it really is, causing the system to run longer than needed and wasting energy.
Determining the right HVAC service professional to provide repair or replacement work can be tough when a certain amount of know-how is lacking. To really ensure that the best approach is being taken, some advance research is essential. Hopefully the material presented above has fulfilled readers’ needs for useful insights in this realm.
